INOTECH   VACUSET   AND   VACUBOTTLE

 

Inotech Vacuset Pipettor and Vacubottle
  • The best liquid aspiration combo, anywhere.

     

  • Safe, efficient, affordable! Works off house vacuum or mini-pump.

     

  • Simplicity of design for convenient, reliable aspiration and dispensing of supernatants, culture media, and other laboratory solutions.

 

Vacuset Pipettor

 

Continuous Liquid Aspiration and Dispensing
  • Application -
    • Controlled, continuous vacuum aspiration of liquids from microtiter plates, tubes, flasks, etc. Also liquid dispensing in gross volumes with push button control.
  • Versatile -
    • Interchangeable tip attachments include multi-channel and single channel formats. Fixed stainless steel tips, disposable plastic tips, 2 ml and Pasteur Pipets.
  • Rapid -
    • Move between rows of wells or tubes without stopping to dispense liquid.
  • Safe & Effective -
    • All components autoclavable. Steel tips are flame sterilizable. Constant, residual negative pressure (adjustable) prevents fluid dripping from tips.

 

IV-500 Vacuset Multi-Tip Kit
  • IV-510 - Vacuset Handpiece, one button control, neg. pressure adjust.
  • IV-501 - Stand for handpiece
  • IV-520 - 8-Channel Tip, for disposable pipet tips, with tip-ejector
  • IV-503 - 8-Channel Tip, 35 mm steel tubes for 96-well plate
  • IV-524 - 4-Channel Tip, 35 mm steel tubes for 24-well plate
  • IV-502 - 1-Channel Tip, 40 mm steel tube
  • IV-504 - 1-Channel Tip, plastic head for disposable pipet tips, nonejector
  • IV-505 - Silicone insert to hold Pasteur Pipet and 2.0 ml pipet
  • IV-516 - Front Collet to secure silicone insert
  • IV-507 - Silicone tube holder, wall mountable
  • IV-506 - Silicone tube, 2 meter, 3/16"ID, 3/8"OD
  • IV-508 - Inotech Swiss Army Knife
 
IV-400 Vacuset 1-Channel Kit for Disposable Pipet Tips
  • IV-510 - Vacuset Handpiece, one button control, neg. pressure adjust.
  • IV-404 - 1-Channel Tip, for disposable pipet tips, with tip ejector.
  • IV-505 - Silicone insert to hold Pasteur Pipet and 2.0 ml pipet
  • IV-516 - Front collet to secure silicone insert
  • IV-506 - Silicone tube, 2 meter, 3/16"ID, 3/8"OD

    * See vacuset footnotes at the end of this section.
 
Catalog No. Description
IV-510 Vacuset Hand Piece, with adapter for insert tip attachments, Pasteur pipettes, and 2ml disposable pipettes. 1/4" hose barb for hose connection to vacuum source.
IV-501 Weighted cradle style, bench top stand for Hand Piece.
IV-526-C8 8 Channel custom manifold, 80mm stainless steel tubes for 48 well plate
IV-526-C12 12 Channel custom manifold, 80mm stainless steel tubes for 96 well plate
IV-526-C6 6 Channel custom manifold, 40mm stainless steel tubes for 24 well plate
IV-526-C3 3 Channel custom manifold, 40mm stainless steel tubes for 6 well plate
IV-503 8 Channel tip, with 35mm steel tubes for 96 well plate.
IV-520 8 Channel tip, with plastic head for 200ul pipette tips, with tip ejector.
IV-520-4 4 Channel tip, modified IV-520 with every other Port cut and blocked
IV-527 6 Channel tip, for 200ul pipette tips, for 48 well microplate use; modified IV-520.
IV-526 6 Channel tip, with 35mm steel tubes, for 48 well plate; modified IV-503.
IV-524 4 Channel tip, with 35mm steel tubes, for 12 or 24 well plates.
IV-525-A 4 Channel tip, with 150mm steel tubes, for 12 or 24 well plates.
IV-502 1 Channel tip, with 40mm length steel tube.
IV-522 1 Channel tip, with 100mm length steel tube.
IV-525 1 Channel tip, with 230mm steel tube, for T175 flasks
IV-504 1 Channel tip, plastic head for 200ul pipette tip
IV-404 1 Channel tip, plastic head for 200ul pipette tip, tip ejector
Accessories
IV-506 Silicone vacuum tube, 2 meters, thick walled, 3/16" ID
IV-506-Q Silicone vacuum tube, 2 meters, thick walled, 1/4" ID
IV-521 Bracket for hand piece wall mount, molded plastic, adhesive back or screw on.
IV-507 Bracket for vacuum tube, wall mount, molded plastic, adhesive backed.
IV-508 Inotech Swiss Army Knife – mini lab tool (why not!)
Support Items
IV-523 Aerosol Blocking Filters (Hydrophobic, PTFE) - 5 Pack
Protect pumps and vacuum lines from hazardous aerosols; 0.1μm retention rating.
IV-534 Quick Disconnect, In Line Couplers – 2 Pack
Provides liquid & air safety seal off feature when disconnected. Ideal for hazardous materials transfer to disposal area.
IV-534-B Quick Disconnect, In Line Couplers – 2Pack
Same as above without safety seal off feature (check valve)
IH-255 Adjustable Vacuum/Compressor Pump 0.76cfm
Oiless, 0.76cfm, 100psig, 25.6”Hg, 1/8hp, 1/4" tabulation fittings, 60db, 12lbs, 8”Lx9”Wx10”H, with gauges and relief valve.
IH-265 Adjustable Vacuum/Compressor Pump - sized to work with Vacuset
Single head, quite, oil free piston pump; 1.6 cfm air flow; vacuum to 27.6" Hg; pressure to 20psi; vacuum & pressure gauges and regulator valves; built in liquid trap on vacuum side; muffler/safety pressure release canister on pressure side; 3/8" barbed hose connectors; 8"L x 9"W x 10"H; 60db, 12 lbs with gauges and relief valve.
IV-700 Air Pressure Bleed Valve
Inline, air pressure bleed valve to allow use of house air systems for liquid dispensing from a pressure bottle via the Vacuset Hand Piece.
VACUSET REPLACEMENT/MAINTENANCE PARTS
IV-511 Valve Stem for Hand Piece
IV-511-G O-Ring for Valve Stem, Viton, 2,57 x 1.78mm, 2/pack
IV-512 Push Button for Hand Piece Valve Control.
IV-513 Bottom Screw (constant vacuum adjuster) for Hand Piece
IV-514 Valve Spring for Hand Piece
IV-515 Rear Hose Barb Connector for Hand Piece, 1/4" OD
IV-515-G O-Ring for Rear Connector, Viton, 6.75 x 1.78mm, 2/pack
IV-516 Front Collet for Hand Piece (for use with insertable tips)
IV-505 Silicone Adapter for insertable tips, and Pasteur and 2ml disposable pipettes.
IV-509 Molykote O-ring grease
Vacubottle, Pressure Bottle & Pump For Liquid Aspiration and Dispensing
  • Application -
    • Vacubottle - continuous liquid aspiration with vacuum.
    • Pressure Bottle - continuous solution deliver via air pressure.
  • Safe -
    • Vacubottle - safety-plastic coating over thick-walled glass; OSHA approved; autoclavable.
    • Pressure Bottle - High density polypropylene (HDPP); pressure release plug; autoclavable.
  • Convenient -
    • Both Bottles - self-sealing, quick-disconnect couplers for quick and safe disconnection of bottle without removing the lid.
    • Wide mouths for ease of cleaning.

 

IV-530 Vacubottle System (Absolutely the Best!)
  • Includes the following components, also sold separately:
    • IV-540 - 3 Liter, plastic safety-coated glass bottle, autoclavable
    • IV-531 - Quick twist-off lid with replaceable gasket, two tube fittings, steel thumb-screw pressure release valve
    • Easy-off, steel hose connectors for quick disconnection of hoses from the lid to facilitate bottle transport for waste removal and cleaning.
    • IV-535 - Bottle rack of stainless steel, bench top or wall mountable, 7"w x 7"d x 5"h
    • IV-506 - Silicone tube, 1 meters, 3/16" ID
    • IV-506-Q - Silicone Vacuum tubing, 1 meters, 1/4" ID
    • Note: Plastic safety-coating may be damaged by repeated autoclaving.
 
IV-550 Pressure Bottle System
  • Includes the following components, also sold separately:
    • 4 Liter, High Density Polypropylene (HDPP) bottle, autoclavable. (IV-560)
    • Screw-cap lid with Silicone or EDPM gasket, two barbed tube fittings, and a pressure release port with silicone pop-off cap.
    • IV-534 - Quick-disconnect couplers (2x)
    • IH-186-4 - In-line solution filter to screen particulates; 30um nylon screen
    • IV-535 - Bottle rack of stainless steel, bench top or wall mountable, 7"w x 7"d x 5"h.
    • IV-506 - Silicone tube, ~2 meters, 3/16" ID
    • Recommend working pressure range - 5 to15 psi. Not to exceed 25 psi
 
IV-570 Pressure Bottle System
  • 2 Liter version of the IV-550 immediately above.
 
IV-255 Adjustable Vacuum/Pressure Pump
  • Adjustable Vacuum/Pressure Pump, Oilless Wobl Piston, .076cfm, 100psig, 25.6" Hg, 1/8hp, 1/4" Tubulation Fittings, 60db, 12ilb, 8"Lx9"Wx10"H, with Gauges and Relief Valve.

Vacuset footnotes:

  1. Additional tip attachment formats are available and tips can be purchased individually.
  2. Suitable for use with DMSO, Dimethylformamide, Ethanol, Methanol, and Acetone.
  3. Avoid prolonged contact (hours) with concentrated inorganic acids, sodium hypochlorite, concentrated aldehydes, methyl chloride, organic solvents, scintillation cocktails, phenol, chloroform, and halogenated hydrocarbons. Flush clean with water or ethanol.